Free gym vending machines — Northern Territory.

Yes — we install and service across every Northern Territory gym precinct: Darwin CBD, Casuarina, Palmerston and Alice Springs, and regional NT sites. 24/7 franchise gyms in Darwin typically install within 7–14 days; regional NT gyms 10–21 days.

500+ active members or 24-hour operation is the standard threshold across Northern Territory. Smaller boutique studios (F45, functional fitness, CrossFit) with heavy daily check-ins can also qualify — talk to us about your daily foot traffic.

Yes — cashless-only tap-to-pay is ideal for unstaffed hours. Anytime Fitness, Plus Fitness, Snap and Jetts sites across Northern Territory are a core part of the program.

Absolutely. Protein bars, ready-to-drink shakes, electrolyte hydration, low-sugar energy drinks and clean-label snacks are standard. We tune the mix quarterly based on real sell-through data from your Northern Territory site.

For qualifying high-traffic sites (500+ daily entries, chain flagships) we offer negotiated revenue-share terms. Ask when you request.

Yes — multi-site franchisor rollouts run under a single account manager on the same free program, with a consistent product plan across every site in Northern Territory and interstate.

Yes. A snack or drink machine is 250–300kg empty and our crew brings a powered stair-climber plus two to three installers. We remove the front door on tight landings, protect balustrades, and hand-turn each landing. Most 1–2 storey stair installs across NSW, VIC and QLD are completed the same morning. See our stair-climb install page for the full method.

Yes. When stairs aren't practical (tight spiral, fire-only, or the machine won't clear a landing) we book a truck-mounted hi-ab crane and lift the unit through a first-storey window. We coordinate the traffic-management permit, spotter, and window removal/reinstall so your building manager only signs off the date.

We ground-protect with reused lexan machine fronts laid end-to-end and pallet-jack each machine across the mat. On a recent Tomago electrical factory install, two machines were moved 150m across new grass to the staff lunchroom this way — two crew, two hours, zero damage. Same method works for softscaping, exposed aggregate and epoxy floors.

Door width (min 820mm ideal), floor level and rating, stair count and landing turns, whether a lift exists and its internal dimensions, distance from loading zone, any bollards or garden beds in the path, and after-hours access. Send photos with your request and we'll pre-plan the exact method — stair-climber, hi-ab or protected carry.

We build a starter planogram from what actually sells at similar sites in your industry and postcode — best-selling drinks, snacks and, on combi units, fresh/frozen lines. It's a 4–6 week baseline. Once remote monitoring has real sales data we rotate slow movers out and give proven sellers extra selections and facings, so the mix keeps improving without you asking.

Every vend motor is cycled, every drop sensor in the delivery bin is confirmed triggering, and the card reader is transaction-tested with a live tap-to-pay. We also test refund flow, price display, and telemetry heartbeat back to our operations centre. If anything hesitates we swap the part before your team ever sees the machine.

We pull the deck and inspect the temperature probe, compressor fan and internal cabinet circulation fan under load. A squeal on either fan means bearings are on the way out and we replace the motor before install rather than after a callout. Air-filter cassettes (where fitted) are removed, blown out or replaced so dust doesn't cook the deck in month three.

Yes. Every machine gets a full detail inside and out before it leaves our workshop — cabinet wipe-down, spiral and shelf clean, tray and delivery-bin scrub. Glass is polished inside and out so products look crystal clear (nobody buys from a dirty-looking machine), and older units get an exterior polish so they present as-new on day one.

Remote monitoring reports sales by selection in real time. We usually action the first rotation at the 4-week mark: slow movers pulled, top sellers doubled up across more selections. Staff can also request swaps directly — a QR code on the machine goes straight to our operations team.

Telemetry flags a card-reader fault the moment it stops handshaking. We dispatch a swap unit — usually next business day — and reconcile any partial transactions automatically. Your team never has to troubleshoot a reader on the floor.